Royal Enfield Himalayan 2022, Руководство пользователя, Страница: 117 / 148


Wash motorcycle when the engine is cold.

Cover the silencer, tail pipe, horn, Control switches,
Instrument cluster & Tripper with suitable plastic bags
and tie it firmly to prevent water entry.

Remove ignition key and seal key hole using adhesive
tape.
 Brush engine area with a solvent to remove dirt or grease.
 Use low pressure jet of water to clean.
 DO NOT spray water directly on the steering stem area as
it will damage the bearings and course the handle bar
movement to become sticky.

Never spray water with great force on headlamp,
speedometer, Tripper, Flasher lights, front and rear
PRECAUTIONS
WASHING PROCEDURE
wheel hubs, electrical connections and wires, control
cables, cables, sparkplug, battery, ABS ECU, EMS ECU,
side mirrors, steering stem etc.
 Do not apply any corrosive solvent on painted surfaces or
rubber parts.
 Use luke warm water and mild detergent on the painted
components to remove dirt, etc.
 Rinse motorcycle thoroughly with plain water to remove
the detergent.
 If possible, use compressed air and blow off water
particles from the hard to reach areas of the motorcycle,
electrical connections etc.

No direct jet at the edges of decal, electrical parts,
coupler joints, silencer tail pipe, radiator lubrication
Royal Enfield Himalayan
115