Royal Enfield Bullet 350, Руководство пользователя, Страница: 31 / 104

30

Insert the wheel along with speedo drive and right
spacer between the front fork ends ensuring that
the brake disc is located between the brake pads.

Insert and tap the front wheel axle gently inside.

Refit the washer and tighten the nut firmly.
NOTE
Ensure that the speedo drive is correctly located such
that the cable can be connected without difficulty.
C A U T I O N
Do not press the front brake lever when wheel is
removed as this will result in brake pads getting
locked.

Tighten the pinch bolt on the right
fork guide.
 Rotate the wheel and check for
smooth rotation.

Connect the speedo cable to
speedo drive and check for proper
working of speedo meter.
MINOR MAINTENANCE TIPS

Tap and remove the front wheel spindle from the
right side.

Tilt the motorcycle to right side and take out the
wheel along with speedo drive and right side
spacer.

Take out Speedo drive and bush on the right side.
 Place a 4 mm thick wooden piece or cardboard
sheet between the brake pads to avoid brake
pads getting locked.
FRONT WHEEL REASSEMBLY (BULLET 350-ES)

Remove the wooden piece / card board sheet
placed between the brake pads.

Place the speedo drive bush in position and place
speedo drive over it.