Royal Enfield Bullet 350 2019 Скачать руководство пользователя страница 29

Страница: 29 / 68

PARKING

PARKING MOTORCYCLE ON CENTER STAND

PARKING MOTORCYCLE ON SIDE STAND



Select a firm, flat surface.



Hold handle bar straight.



Lower center stand, and
ensure that both the legs
of the stand are resting
evenly on firm ground.



Select a firm, flat

surface.



Extend side stand. Tilt

the motorcycle to the left,

till it is supported firmly.

W A R N I N G

Ensure both the stands are retracted fully before

riding the motorcycle.
Please exercise extreme care while parking and

ensure it is parked firmly to avoid the motorcycle from

falling over and causing injury to you or to others and

damage to the motorcycle parts.

C A U T I O N

When Side stand is in extended position.
a) Engine will start if vehicle is in neutral, but will cut-

off (ignition and fuel) when gear is engaged.

b) Engine will not start if gear is engaged already.

NOTE
The Side stand is only designed for the weight of the

motorcycle. Do not sit on the motorcycle when it is

resting on the side stand. The side stand or frame

may become damaged and the motorcycle may fall

over.



Apply pressure on the fulcrum lever on the center

stand and pull motorcycle backwards, gently.

Содержание Bullet 350 2019





































































Результаты поиска

Содержание Bullet 350 2019

Отзывы:

Бренды по названию

Популярные бренды

Royal Enfield Bullet 350 2019, Руководство пользователя

Результаты поиска

Содержание Bullet 350 2019

Отзывы:

Бренды по названию

Популярные бренды