Roxor In the Groove 2, Руководство по обслуживанию

Страница: 12 / 41

11
* Stuck Sensors
* Unresponsive Sensors
* Repairing a Sensor
Stuck sensors severely impair gameplay. A stuck sensor will not recognize
any change in applied pressure during gameplay.
If the Input Test screen shows a sensor as being held when no pressure is
applied to the panel, then the sensor ir stuck and maintenance is required.
Follow the Rpairing a Sensor instructions below to correct the problem.
Unresponsive sensors adversely affect gameplay. If a sensor does not
respond properly to applied pressure, the game may not accurately
register correctly timed steps during gameplay.
To test each of the 4 sensors in a panel, ise your foot to apply pressure
on the 4 inside edges (left, right, top, and down) of each panel. Check
that each of the four sensors in every panel can be activated by stepping
on the inside edges. If a sensor does not register or is unresponsive,
follow the Repairing a Sesnor instructions below.
To fix a stuck or unresponsive sensor, unscrew the two adjacenet corner
brackets on the panel. Carefully slide out the plexiglass panel. Remove
the problem sensor from its metal bracket, clean dirt and other particles
from the bracket area, inspect the sensor for physical damage, then reseat
the sensor. Replace the plexiglass and re-test the sensor. If the sensor
continues to be stuck or unresponsive, the sensor will need to be replaced.
TEST & CUSTOMIZE OPERATOR MENU