SL08_Rev01
Work Instruction Template
Template Released 8 November 2018
Work Instruction: Install MTX Sound Bar (Aluminum)
Sound Bar Kit (P/N 1503AUA00031N)
CONFIDENTIAL DOCUMENT
© 2020 Mahindra Vehicle Sales and Service, Inc. All Rights Reserved.
ROXOR is a registered trademark of Mahindra Vehicle Sales and Service, Inc.
Page 1 of 3
W O R K I N S T R U C T I O N O V E R V I E W
l
DO NOT ATTEMPT THIS PROCEDURE IF YOU DO NOT
HAVE PROPER TOOLS, TRAINING, AND FACILITIES.
l
Read and follow all instructions provided when installing
this product. Failure to do so may result in placing
occupants at risk of serious injury or death.
l
To protect bystanders and the service technician(s), shut
vehicle off, remove the Ignition Key and secure vehicle to
prevent unintended movement.
l
Never operate the vehicle in excess of manufacturer’s
specifications.
l
This installation requires a ROPS Harness sold separately;
o
Sound Bar Only use ROPS harness
Part Number - 1801CUA00041N
o
Sound Bar with KC 40" Light Bar use ROPS harness
Part Number - 1801CUA00021N
For assistance installing these
T O O L S R E Q U I R E D
o
10 mm Wrench
o
10 mm Socket
o
5 mm Allen Wrench
o
Socket Wrench
o
Utility Knife / Scissors
o
Protective Eye-wear
T O R Q U E S P E C I F I C A T I O N
Tighten each fastener to the torque specification below:
l
M6 Cap Head Allen Bolts – 6.0 to 6.5 N•m
l
M6 Hex Head Shoulder Bolts – 7.5 to 8.0 N•m
K I T
Kit Number - 1503AUA00031N
Kit
Component
Description
Qty
MTX Sound Bar
1
Mounting Block Assemblies
2
Bar Mounting Clamps
2
Hex Head Shoulder Bolt - M6
2
Flat Washer - M6
2
Hex Flange Nut - M6
2
I N S T A L L A T I O N P R O C E D U R E
1. Remove Hard Top, Soft Cab Enclosure or Bikini Top if
equipped.
2. Connect and route ROPS Sound Bar Harness (Part Number
- 1801CUA00041N) as shown.
For more detail on this step refer to
"Installing ROPS Accessory Harnesses"
