Information
If in doubt of any aspect regarding the assembly, use or safety of your garden arbour please contact us:
Help Line: (Normal Office Hours) 01829 261 121
Email: [email protected]
ROWLINSON GARDEN PRODUCTS LIMITED
Green Lane
Wardle Nr. Nantwich
Cheshire
CW5 6BN
www.rowgar.co.uk
We constantly improve the quality of our products,
occasionally the components may differ from the
components shown and are only correct at time
of printing. We reserve the right to change the
specification of our products without prior notice.
2017 © Rowlinson Garden Products Ltd
6. Roof slats
Position the centre roof slat into the rebate and fix in place using 4 x 40mm screws. Evenly spread a roof slats section
over each side of the roof and secure using 2 x 40mm screws per slat, screw through the slats and into the rafters.
5. Rafters to uprights
Lift the rafter sections onto the rebates of the uprights. Drill two holes at each corner of the roof, then secure the
roof to the uprights using 2 x 50mm screw per corner. Drill two holes in each small finial. Secure the finials over the
joins between the rafter and the uprights using 2 x 40mm screws per finial.
Roof slat
Rafter
Rafter
40mm
IMPORTANT: RETAIN FOR FUTURE REFERENCE READ CAREFULLY
• Periodically check all fastenings for tightness
• For domestic use only
40mm
50mm
Drill
40mm
Drill
