![Rowi MA20.0-CP-LED Скачать руководство пользователя страница 4](http://html1.mh-extra.com/html/rowi/ma20-0-cp-led/ma20-0-cp-led_user-manual_1493650004.webp)
!
!
!
!
!
Definition of the signal words and symbols:
CAUTION!
Possibly dangerous situation. Low risk of
injury to people.
IMPORTANT!
Read the usage instructions carefully and
retain these. Upon transmission of the
product to third parties, please also provide
the usage instructions.
DANGER!
Extremely dangerous situation. If not
observed, death or serious injury.
DANGER!
Extremely dangerous situation. If not observed, death or serious injury.
CAUTION!
Low risk of injury to people.
NOTE!
What you need to observe.
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Prevent mechanical sress.
Ensure that the present supply voltage corresponds to that on the identification plate. If not
observed, LED spotlight may malfunction.
For additional extension, use an extension cable admissible for exterior use. This reduces the
risk of an electrical shock (up to 20 m length Ø 1,5 mm², 20 - 50 m length: Ø 2,5 mm²).
Disconnect the working lamp from the power supply when there is a thunderstorm. Electrical
equipment connected to the power supply can be damaged in a thunderstorm.
A safe distance should always be maintained between the light and the surface to be
illuminated. The mobile work light does get hot when in operation.
Allow a safety distance of approx. 50 cm to all sides of the product. This guarantees heat
dissipation.
-3-
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Keep children away from packaging material (e.g.
plastic foils) due to the risk of choking.
If not observed, danger of electric shock!
Ÿ
Before performing any work on the device, please
disconnect from power!
Only connect the device to 230 V power point.
The installation of these devices is work on the
power supply; consequently, it must be executed
professionally according to the country specific
regulation and connection requirements.
Do not use the worklamp in an area where there
is a danger of explosions, in which there are
combustible liquids, gases or dusts. This
worklamp is not permitted in this environment.
Do not fix the worklamp over water containers
(e.g. bath tubs, sinks, swimming pools, etc.).
Ÿ
Never manipulate or change the device
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Do not use the device if there are visible
defects
The device is protected against humidity
and splashed water. The device is not
water tight!
On the part of the site, secure the work
lamp only with a 10 / 16 A circuit breaker.
On the part of the site, secure the device
only with a 10 / 16 A circuit breaker.
Supervise children near device in order to
ensure that they do not play with them.
Protect the power cable against oil, sharp
edges and high temperatures. Electrical
shock hazard in case of non-compliance.