30/40
The appliance may only be mounted horizontally on the wall. Always ensure the
required minimum distance of 50 cm to flammable objects and other hazard sources.
Fit supporting feet
1.
Place the supporting feet over the tapped holes on the
appliance.
2.
Then screw the supporting feet onto the heater using the
screws included in the scope of supply.
3.
Attach the castors onto the supporting feet by gently pres-
sing them in.
Wall mounting, optional
Ensure a minimum distance of
60 cm
to the floor
when mounting the appliance.
2.
Drill the holes Ø 8 mm and approx. 35 mm deep
into the wall.
3.
Insert the dowels and hang in the appliance.
4.
Screw the spacers onto the rear of the appliance.
P
Mounting the appliance on the ceiling is prohibited.
P
Wall mounting is only possible after removing the
supporting feet.
24 mm
24 mm
A
A
= 250 mm HWH 1000/3/1
A
= 450 mm HWH 2000/3/1
24 mm
24 mm
A
A
= 250 mm HWH 1000/3/1
A
= 450 mm HWH 2000/3/1
24 mm
24 mm
A
A
= 250 mm HWH 1000/3/1
A
= 450 mm HWH 2000/3/1
24 mm
24 mm
A
A
= 250 mm HWH 1000/3/1
A
= 450 mm HWH 2000/3/1
GB
