Rowi HKH 1500/2/1 Retro, Руководство по эксплуатации

Страница: 29 / 40

29/36
3. Operating Instructions
3.1 Appliance overview
Fig. 1: Appliance overview
No. Designation
1 Heating level switch
2 Air outlet
3 Temperature control (thermostat)
4 Pilot lamp
Tab. 2: Appliance labeling
3.2 Starting use
The appliance can be put into operation after removing the packaging. Proceed as follows
for this:
1. Make sure the heating level switch (see Fig. 1, No. 1) is at “0”. Then connect the fan
heater to an earthed socket protected with an earth-leakage circuit breaker.
2. Now switch on the appliance by moving the heating level switch (see Fig. 1, No. 1) to
the desired position. The red pilot lamp lights up. The following applies here:
1
2
3
4
GB