ROWHEELS Rev Series Скачать руководство пользователя страница 3

 ROWHEELS REV OWNER’S MANUAL – OPERATION AND MAINTENANCE © ROWHEELS, INC. 

1

2

 ROWHEELS REV OWNER’S MANUAL – OPERATION AND MAINTENANCE © ROWHEELS, INC. 

Prior to using your REV™ wheelset please be sure to closely 

read the instructions pertaining to safety and installation. It 

is highly recommended that you seek and use the advice of a 

trained professional service technician.  If anything is unclear 

please contact Rowheels Inc. at [email protected] or 

contact your local equipment provider.  Failure to understand 

installation or improper use of your REV™ Wheelset could      

result in serious injury or damage to your chair and wheelset.   

SAFETY INFORMATION

As with standard wheels, always use your wheelchair within 

the limits of your ability and in accordance with the 

manufacturer’s specifications.  Failure to do so may cause 

serious injury or death.

The REV™ is designed to keep the geometry of your chair 

similar to a standard set of wheels, but to achieve optimal 

posture and positioning, it may be necessary to make 

modifications to your chair.  If such modifications are desired, 

please contact your local wheelchair provider.

PRODUCT LIMITS

• Maximum axle camber is 4 degrees for the REV-HX 

and 6 degrees for the REV-LX.

• Maximum user weight is 300 pounds (136 kgs)

• Do not submerge your wheels in water or clean with 

a pressure washer.

• Use only mild soap and water to clean your wheels, 

no solvents, abrasives or bleach should be used.

• Do not disassemble or remove seals on your wheels,     

doing so will void the warranty.

• Avoid sandy conditions and any other exposure to 

excessive fine particles.

• When weight shifting, refrain from using only the 

handrim.  Hands should be placed on the tire or tire 

and handrim together.

WARNING: Your REV™ wheelset is equipped with spoke 

guards that are specifically designed to keep hands and 

fingers safe.  Do not operate the wheels if these guards 

have been damaged or removed.  Operation without this        

equipment may result in serious injury. 

WARNING: Verify that wheel axles, frame clamps and torque 

arms are properly inserted and in a locked fixed position 

prior to use.  Failure to adhere to this precaution may result 

in improper operation or serious injury.

WARNING: It is strongly recommended that anti-tipping 

devices be used at all times.  Failure to do so may result in 

serious injury. 

WARNING!

WARNING!

WARNING!

WARNING!

Be careful when navigating steep hills and always          

operate under control.  Be specifically aware of the        

position of your body in the chair.  Correct balance when 

navigating hills may differ from conventional wheels and 

may require the user to reposition themselves to avoid 

tipping.

Be careful of excessive speed and ride under control at all 

times, especially when going downhill.  Maintain proper   

braking pressure with hands and control downhill speed 

at all times to avoid accidents and collisions.

Rowheels REV™ wheelsets are a precision mechanical 

device. As such, users should always provide proper care, 

especially when installing, removing or storing wheelsets. 

Remain  attentive when attaching, removing and stowing 

the wheelset.  Be cautious of moving parts, metal edges 

and other mechanisms that may cause injury.  

Содержание Rev Series














Отзывы: