WIRING INSTRUCTIONS
(for uk only)
Wa r n i n g :
this appliance must be eart h e d .
I m p o rtant :
the wires in this lead
are coloured in
accordance with
the following codes:
Green and Ye l l o w : eart h
B r o w n : liv e
B l u e : neutral
• Connect the green/yellow wire to the terminal in the plug marked “E” or by the
earth symbol
or coloured green or coloured green and yellow.
• Connect the brown wire to the terminal in the plug marked “L” or coloured red.
• Connect the blue wire to the terminal in the plug marked “N” or coloured black.
• A 13 amp fuse should be fitted when the appliance is connected to a BS 1363 A
plug.
• Seek professional advice if unsure of the correct procedure for the above.
• Important : if the electrical cord of this appliance is damaged or shows signs of
wear, it must only be replaced by an authorised Tefal Service Centre (see section
After Sales Service).
About your factory fitted plug
(supplied with certain models only)
• The cord is already fitted with a plug incorporating an appropriate fuse. If the plug
does not fit your socket outlet, see paragraph below. Should you need to replace
the fuse in the plug supplied an appropriately rated approved BS 1362 fuse must
be used (refer to wiring instructions specification for fuse rating). If the plug sup-
plied does not fit your socket outlet, it should be removed from the mains lead
and disposed of safety. The flexible cord insulation should be stripped back as
appropriate and a suitable alternative plug fitted.
• If the plug has external access to the fuse (non-rewirable type plug) please note
that the fuse cover is an important part of the plug.Please ensure that it is always
refitted correctly. If you lose this cover please do not use the plug. You may
contact Rowenta UK Limited for a replacement.
Downloaded from CoffeeMachineManual.com Manuals
