Rowenta Smart Force Essential Series, Руководство пользователя

Страница: 53 / 64

53
7.
IS THERE A PROBLEM WITH YOUR APPLIANCE?
According to model:
• The charger is getting hot:
4
This is perfectly normal. The vacuum cleaner can remain permanently connected to the charger
without any risk.
• The charger is connected but your appliance is not charging:
- The charger is incorrectly attached to the appliance or is faulty.
4
Check that the charger is properly connected or contact an Approved Services Centre to change
the charger.
• Your appliance stops during use:
- Your appliance may be overheating.
4
Stop the appliance and leave cool for at least 1 hour.
4
If it overheats on repeated occasions, contact the Approved Services Centre.
• The appliance stopped after the charge light was flashing:
- The appliance has run out of battery charge.
4
Recharge the vacuum cleaner.
• The power-brush is not working properly or makes a noise:
- The rotating brush or hose are obstructed.
4
Stop the vacuum cleaner and clean them.
- The brush is worn.
4
Contact an Approved Service Centre to change the brush.
- The belt is worn.
4
Contact an Approved Service Centre to change the belt.
• The power-brush stops during vacuuming:
- The safety function has been triggered.
4
Stop the vacuum cleaner. Check that nothing is obstructing the rotation of the brush; if there is an
obstruction, remove it and clean the power-brush, then turn on the vacuum cleaner.
• Your vacuum cleaner is not vacuuming as well, is making noise, whistling:
- The intake channel is partially blocked.
4
Unblock it
- The dust collector is full.
 Empty it and clean it.
- The dust collector is not properly fitted.
4
Re-position it correctly.
- The intake head is clogged.
4
Remove the power-brush and clean it.
- The protective foam filter is saturated.
4
Clean it.
EN