Rowenta PU3080F0, Руководство пользователя

Страница: 10 / 36

10
•
Indication of air quality
Air quality indicator (12) is located at the front panel (C) of the appliance. The 3 LED lights will indicate the air
quality level:
Air Quality Air quality indicator color
Excellent Blue
Slight pollution Green
Moderate pollution Yellow
High pollution Orange
Extreme pollution Red
CARE AND MAINTENANCE
Before performing any maintenance work, switch off the air purifier using the on/off button (1).
Use a damp cloth to clean the surface of the product.
Important: Do not use any abrasive materials, as these may damage the surface of the product.
Frequency of cleaning/replacing the filters :
Filter Clean/replace Frequency Filter codes
Pre filter Clean Every 2 months
2in1 Active Carbon & filter Replace Every 12 months XD6231
Nan filter Replace
Color changing (see
color chart on filter)
or every 12 months in
case of no saturation.
XD6082
These figures are based on tests in which the air purifier is used for 8 hours per day in quiet mode.
You may need to replace the filters more often depending on the air quality and how often the air purifier
is used. The filter replacement indicator (7) will turn on when the filters need to be replaced and you
will receive a notification on your mobile application. To replace the filters, please refer to the section
“Disassembling / Reassembling filters”.
Important! When the filter replacement indicator (7) turns on, please check on the mobile application in
order to know which filter has to be replaced. If two filters must be changed, please change them one by one.
Change the second filter only after changing the first one and after resetting the first filter.
•
The pre-filter can be cleaned with a vacuum cleaner or rinsed in water.
Important: Resetting the filter
After replacing the filter, press the mode button (2) for 3 seconds to reset the filter settings.
Performing a force reset:
If you replace a filter before the end of its lifespan, press the mode button (2) for 3 seconds to reset the
filter settings.
Caution :
If the granules of the filter become "white opaque", the filter needs to be removed from the purifier until the
granules become transparent again.
If the opaque appearance persists, the filter needs to be changed.
If the granules become "crumbly", the filter needs to be changed.
The appliance efficiency can be reduced if the pre-filter is not cleaned regularly.
Never use a pre-filter that is still damp.
The pre-filter is the only filter which can be cleaned with water and re-used.
The 2in1 Active Carbon & Filter cannot be cleaned and re-used, so never wash with water. It must be
replaced at the end of its lifespan.
If the nan filter granules become opaque red and/or crumbly, the filter should be changed.
For optimum performance of the appliance, only use filters provided by Rowenta.
Please note: certain filters may emit a temporary slight odor, due to the transport and storage conditions. This
odor will vanish and is not dangerous for people.