Rowe HASCP, Руководство по эксплуатации

Страница: 31 / 79

31
U Spare
7.3 HASCP Commands
7.3.a
Command Summary
The Tables below lists the various commands used by the HASCP software.
Table 4. System Deployment Commands
Command Description
START Start ADCP pinging.
Note : Once started, the system won’t respond to any commands except STOP, STIME and
CSHOW commands.
STOP Stop pinging and return to the command input mode.
SLEEP Power down system.
SLEEPA Set wakeup alarm for 10 seconds then Power down system.
SLEEPSECONDS i Seconds to wait before going to sleep when system is in the STOP state.
SPOS Display System Geo Position.
SPOS i, ii, iii, iv, v Enter the system Geo Position, in which
i. Latitude (deg)
ii. Longitude (deg)
iii. Deployment Depth (m)
iv. Height Above Bottom (m)
v. River Bank 0 = Left Bank, 1 = Right Bank
STIME Display the System Time.
STIME YYYY/MM/DD,HH:MM:SS Set the System Time.
Table 5. Firmware Commands
Command Description
FMSHOW Show the Firmware Version
Table 6. Data Storage Commands
Command Description