Nissan GT-R R35 Electric Ride-On Car
10
4. Install the wing mirrors.
•
Place each wing mirror (
M
) into position and place the stem into the
hole (
N
) in the door.
•
Secure each wing mirror from underneath using a self-tapping
screw (
O
). Tighten (rotate right) the screws using a Phillips head
screwdriver, however, be careful not to over-tighten the screws as
they are screwing into plastic.
5. Install the windscreen.
•
Align the tabs at the bottom of the windscreen (
P
) with the
slots in the main body. Carefully push the windscreen down
so it is properly located by the tabs/slots.
6. Connect the battery.
•
Firmly push the unconnected battery wire (
Q
) onto the free
battery terminal (
R
). Once connected, the battery can be
charged using the vehicle charging port.
7. Install the seat (this also acts as a battery cover).
•
Ensure no wires can be crushed or pinched when the seat is installed. Unbuckle the seat belt if
required and move it to the edges of the vehicle.
•
Attach the seat (
R
) to the vehicle at points marked "
X
" using 4 self-tapping screws. Tighten (rotate
right) the screws using a Phillips head screwdriver, however, be careful not to over-tighten the
screws as they are screwing into plastic.
Assembly is now complete.
X
X
M
N
O
P
Q
P
X
X
