www.rovingnetworks.com
3
RN -BT H ID-RD -U M-1.10
You can also perform the following operations by pressing the buttons for a longer time:
•
To put the controller to sleep, press B7 for 4 seconds.
•
To toggle the iOS virtual keyboard, press B5 for 3 seconds.
•
To toggle between modes 1 and 3, press B6 for 3 seconds.
OPERATION
The following sections describe how to operate the iRemote controller, including how to power it on and off,
pairing/connecting, and operational modes.
Power On/Off
To turn the iRemote on, press and hold B7 until the LEDs blink, then release it.
To turn the iRemote off, press and hold B7 for 4 seconds until both LEDs flash quickly, then release it. The iRemote
automatically turns off if no buttons are pressed for 120 seconds.
Status LEDs
Table 2 describes the status LEDs.
Table 2. Status LEDs
LED
Action
Meaning
Green
Short blink
The device is turned on but not connected and not paired.
Even blink
The device is on and attempting to connect to a previously paired host.
Solid
The device is turned on and connected.
Red
Blinking
The LED blinks the appropriate number of times to denote the mode:
•
Presenter
•
Custom
•
Music
Pairing & Connecting
By design, the iRemote is always be discoverable and shows up as a keyboard with the device name shown as
iRemote-
ABCD
, where
ABCD
represents the last 2 bytes and the Bluetooth MAC address.
iOS Pairing
To pair the iRemote to an iOS device such as an iPad, iPod, or iPhone, perform the following steps:
Tap the
Settings
icon.
Select
General
>
Bluetooth
>
iRemote-ABCD
.
