Kali-Ko Kathouses 20 Kiji Dava Circle Prescott, Arizona 86301 1-800-658-5925
Step 3:
Secure the shelves in place with the #S31shelf support braces. The
#F24 shelves will have (1) #S31 support brace attached, and the #F26 shelf will
have (2) #S31. The single braces for the #F24 shelves will go approximately in
the center of the shelf, and the (2) #S31 braces for,
fig. 1
fig. 2
fig. 3
The #F26 shelf will go approximately 2 ft. to the left and right of the center. Snap
on the #S31
braces with the ‘cap’ connecting to the shelves outside pipe and the
angled part of the brace connecting to the lower panel. Secure as shown in
figure 2 (
also shown from the underside of the shelf
).
Step 4:
Place the #C72C (lid) by setting the lid panels on top of the enclosure,
making sure the #200 panel clips are facing down. Walk around the enclosure,
snapping the #200 panel clips on as you go around. Make sure the lid is
centered, and ‘even-up’ any sides that are sagging.
*NOTE: An enclosure should never be used outside without a floor attached.
Congratulations!
You are now ready to use your Kali-Ko Kathouse #K646
enclosure
.
Property of Kali-Ko Kathouses, Div. of Rover Company
WWW.ROVERPET.COM
