Rover RS3100, Руководство оператора, Страница: 36 / 40

36
2.4 For the purpose of Table A:
(1) “ Attachments ” means any component of a product that is not a supplied as a standard
component (i.e. it is purchased separately)
(2) Where a primary or secondary school purchases an MTD Product for use by that school,
that use will be classified as Residential Use;
(3) Honda, Briggs & Stratton and Kohler & Kawasaki engines are “ Non Rover ” engines;
(4) Normal Wear Parts include batteries, blades, blade bolts, V-belts, line heads, spark plugs
and filters, as classified by MTD; and
(5) “rolling chassis” means the frame plus the "running gear" like handle bars, wheels,
driveshaft and axle.
2.5 In the event of dispute, MTD will determine whether the MTD Product was used for a
Residential Use or Commercial Use.
3 Exclusions and Limitations
3.1 The Warranty ceases to apply to any MTD Product if it is:
(1) serviced or repaired using non-genuine parts (being parts or components not originally
manufactured or imported into Australia by MTD); or
(2) assembled, serviced, modified or adjusted by a person not appropriately trained in the
assembly, servicing, modification or adjustment of the MTD Product, as determined by MTD.
3.2 This Warranty does not apply to, or in any way cover:
(1) normal wear and tear;
(2) defects in or related to the battery;
(3) any defect that was brought to your attention, or would reasonably have been revealed
to you if you had conducted an examination, before acquiring the MTD Product;
(4) any defect in, or defect caused by, parts or components that were not:
(a) manufactured or imported into Australia by MTD;
(b) supplied by a supplier approved by MTD; or
(c) approved by MTD for use with the MTD Product;
(5) any failure arising from accident, abuse, act of God, fire, sabotage, vandalism,
contaminated fluids or neglect or failure to operate, store and/or maintain and service the
MTD Product in accordance with the instruction manual supplied with the MTD Product;
(6) any parts or services required for the normal and regular maintenance of the MTD
Product e.g. lubricants;
(7) normal adjustments which are noted in the instruction manual supplied with the MTD
Product;
(8) any defect caused by the engine being turned other than in accordance with the
instruction manual supplied with the MTD Product;
(9) any defect arising from the use of:
(a) fuel or fuel and oil mix for the engine;
(b) chain and bar oil for the oil pump; or
(c) lubricating oil in a four stroke engine;
APAC-#23722698-v2