35
What you will need if you prefer to use this feature?
What should you konw before using this feature?
camera starts to move, which makes the light captured by the
camera to change (hence, the camera notices that something in
front of it is moving) which will trigger the camera to START
recording automatically.
Now, the camera will continue to record until there is NO
more motion in front of the camera. Then it will STOP record-
ing and stay in stand by mode (idle mode) until the next
motion detection event occurs and triggers the camera.
ANSWER:
Hard-Wiring your dash cam to car's fuse box to
always hot/continuous power supply.
NOTE:
In order to use the motion detection, the camera must stay
in stand by mode, and for the camera to be in stand by mode, it
requires a continuous power supply.
Therefore, you will need to HARD WIRE your dash cam to your
car's battery via car's fuse box to always HOT socket which
provides continuous power even when car's key is turned
OFF/LOCK position.
The camera will NOT turn ON/OFF automatically if you
Hard-Wire your dash cam to always hot/continuous power
supply. You will have to manually turn ON/OFF your camera.
