See www.routerboard.com for more information. Contact [email protected] for support questions.
21/08/13
Federal Communication Commission Interference Statement
(FCC ID:TV7GROOVE-‐5HN, TV7GROOVE-‐2HN, TV7GRV-‐A52HPN)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
•
Consult the dealer or an experienced radio/TV technician for help
FCC Caution
: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority
to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation. This device and its antenna must not be co-‐located or operation in conjunction with any other antenna or transmitter.
IMPORTANT
: Exposure to Radio Frequency Radiation. 20 cm minimum distance has to be maintained between the antenna and the
occupational user and 45 cm to general public. Under such configuration, the FCC radiation exposure limits set forth for an
population/uncontrolled environment can be satisfied.
MODIFICATIONS:
The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved
by the manufacturer may void the user’s authority to operate the equipment. The correction of interference caused by unauthorized
modification, substitution or attachment will be the responsibility of the user. The manufacturer and its authorized resellers or distributors
are not liable for any damage or violation of government regulations that may arise from failing to comply with these guidelines.
PROFFESIONAL INSTALLATION ATTESTATION:
MIKROTIKLS SIA addresses the following items to ensure that the above referenced
equipment is professionally installed: The
TV7GROOVE-‐5HN, TV7GROOVE-‐2HN, TV7GRV-‐A52HPN
will only be sold by MIKROTIKLS SIA
or one of its authorized dealers. MIKROTIKLS SIA and its authorized dealers will be under strict marketing control and will only market and
sell the TV7GROOVE-‐5HN to professionals.
Professional installation is required for the TV7GROOVE-‐5HN and will be performed only by someone knowledgeable of its use.
MIKROTIKLS SIA will ensure that the TV7GROOVE-‐5HN is only marketed and sold to professionals.
The TV7GROOVE-‐5HN is not sold to the general public and is sold only for industrial or commercial use by professional installers.
LIST OF APPROVED 2GHz ANTENNAS:
•
24 dBi Dish DC 24-‐HD-‐PFIP
•
20 dBi Panel WLP-‐2450-‐20
•
17 dBi Sector SA 24-‐90-‐17-‐WB
•
15 dBi Omni Directional (pole) WL0-‐2450-‐15
•
13 dBi Omni Directional (hor. Polarization) HP, 0DH 24-‐13
LIST OF APPROVED 5GHz ANTENNAS:
•
8.5 dBi Omni MTI Wireless MT-‐482016NA
•
24 dBi Panel Pacific Wireless PA58-‐24
•
32 dBi Dish Pacific Wireless HDDA5W-‐32-‐DP
The product will not be sold with any of the antennas listed above.
The model Groove A-52HPn will be marketed with antenna for 2 GHz, with a gain of 6 dBi.
Antennas of same type and lower gain than those listed above may be used in compliance with certification.
