23/05/2019
Roundshot VR Drive Instruction Manual
–
Firmware Version 2.023
63
Click on
“speed”
to change the rotation speed for the VR Drive.
Enter the “X speed” for the horizontal movement.
Enter the “Y speed” for the vertical movement.
The minimum speeds are:
•
X: 6 seconds
(for a horizontal movement of 360
°
)
•
Y: 10 seconds
(for a vertical movement of 180
°
)
Confirm with
“OK”
or cancel with
“X”
.
Click on
“release time”
to change the duration of the release signal
given by the VR Drive to the camera for every image.
The release time corresponds to the duration of the release signal
given from the VR Drive to the camera.
Varying the release time is required to optimise the operation of
the VR Drive in “speed” mode.
Confirm with
“OK”
or cancel with
“X”
.
Click on
“pause position”
to change the pause at the start or at the
end of the capture sequence at 1 position.
The pause start/end position is used to minimise potential
vibrations caused by motor movements.
Click on
“pause image”
to change the pause before or after every
image.
The pause before/after image is only available when more than one
image is taken at every position. It is used for example with long
exposure times.
Confirm with
“OK”
or cancel with
“X”
.
X
6
Y
10
[6..9999]
[8..9999]
release time
0.1s
Pause position
0 s
0 s
release time
0.1..0.9
0.1
s
speed
6s
elev.
0
images
7
[-90..90]
[1..9999]
pause before
0
s
pause after
0
[0.0..999.9]
[0.0..999.9]
s
Pause image
0 s
0 s
4.1
Editing in quality, speed and turntable modes (continued)