The locomotive can now be turned on using the switch located in
the cab on the left-hand side.
Operating the locomotive.
Fit Four AA alkaline batteries into the bottom of the Transmitter
Handset. Lift up the ‘Flip Cover’ at the top, rear of the transmitter.
Turn on the Transmitter by moving the ON / OFF toggle switch to
the Left. Do not adjust any of the other switches or controls on the
Transmitter. Always turn on the transmitter before the locomotive to
ensure correct operation.
On / Off
Toggle Switch
Running the locomotive.
With the transmitter and the locomotive both switched on, use the
hand wheel on the transmitter to move the locomotive in either
forward or reverse direction. When the hand wheel is released, it
will spring back to mid gear position and the locomotive will stop.
