GPS/Cam Evaluation Board
Quick Start Guide
Page 3 of 7
Version 1.1
Round Solutions GmbH & Co KG
Tel +49 6103 960510 Fax +49 6103 960509
[email protected] wwww.roundsolutions.com
LK1
No links
Enables the TSIP input and output on pins 2 & 3 of RS232 connector. You
should use this mode when using the GPS evaluation software and the
camera evaluation software. If you want to see the NMEA output it is
available on Pin1 of the RS232 connector.
1 & 2
Enables NMEA output on pin 2 of RS232 connector.
2 & 3
RTS from PC controls TSIP or NMEA output.
LK2
Link OFF enables RS232 transceiver. Keep this off for normal operation.
Link ON disables RS232 transceiver. This will stop all data in/out to RS232
connector.
BATT
Link ON connects the Lithium backup battery to the GPS receiver.
You’ll need this ON to get a quick fix after power off.
Link OFF disconnects the Lithium backup battery to the GPS receiver.
LK4
Link ON enables power to the GPS receiver and camera.
Link OFF power is controlled by the DTR line from the RS232 connector.
