1.
Remove the (6) push pins securing the top of the grille using an auto trim puller or flat head screwdriver.
See Photo
1.
Retain the push pins.
2.
Lean the top of the grill out and release the clips at the bottom of the grille with a flat head screwdriver.
See Photo 2.
3.
Remove the grill and set aside in a safe location.
4.
Using a 10mm socket remove the (3) bolts in each of the head lights.
See Photo 3.
Retain hardware.
5.
Remove the headlights from the mount and disconnect the plug from the headlight.
See Photo 4.
6.
Remove the fuse box lid. Using the fuse box cover as a guide, locate fuse in location F52 in the center / right of the
fuse box. Remove fuse F52 (20 amp fuse
-
cigarette lighter).
See Photo 5.
7.
Install the removed fuse into the new fuse
-
able link. Then plug into the fuse box, making sure the link is fully pressed
into the fuse box.
See Photo 6.
8.
Connect the positive wire of the DRL wiring harness to the fuse
-
able link and crimp. Ground the negative wire to the
negative battery post.
Photo 1
Photo 2
Photo 3
Photo 4
Photo 5
Photo 6
Remove the 6 push pins in the grille.
Release the clips at the bottom of the grille.
Remove the 3 bolts in the headlight.
Disconnect the plug from the headlight.
Remove fuse F52.
Install the new fuse
-
able link.
INSTALLATION INSTRUCTONS
