23.
Using a reciprocating saw, trim the inner grille where marked in step 22.
See Photo 19.
24.
Remove the cut portion and sand the cut edges smooth.
See Photo 20.
25.
Repeat steps 22
-
24 on the opposite side of the inner grille.
26.
Clip the inner grille into the grille shell.
27.
Attach the light to the supplied light bracket trim ring using the supplied hardware and Allen.
See Photo 21.
28.
Attach the supplied light bracket mount to the inside of the light bracket trim ring using the supplied 1/4” x 5/8” button
head bolt and nut. Do not tighten at this time.
See Photo 22.
29.
Place the light assembly into the front of the grille. You will have to rotate the light bracket mount to allow it to fit
through the grille opening.
30.
Install the outer light bracket mount on the light trim ring using the supplied 1/4” x 5/8” button head bolt and nut.
Tighten both mounts using a 5/32” Allen and a 7/16” socket, making sure the mounts clip on the inner grille on both
sides.
Photos 23 & 24.
Install light in trim ring.
Photo 21
Photo 22
Install inner mounting bracket.
Photo 19
Photo 20
Trim inner grile.
Sand cut edges smooth.
Photo 24
Install outer mounting bracket.
Tighten hardware.
Photo 23
