By purchasing any item sold by Rough Country, LLC, the buyer expressly warrants that he/she is in compliance with all applica-
ble
Federal, State, and Local laws and regulations regarding the purchase, ownership, and use of the item.
It shall be the buy-
ers responsibility to comply with all Federal, State and Local laws governing the sales of any items listed, illustrated or sold.
The
buyer expressly agrees to indemnify and hold harmless Rough Country, LLC for all claims resulting directly or indirectly from the
purchase, ownership, or use of the items.
14.
Install bumper using the four supplied 14mm x 45mm bolts, flat washers and lock nuts taking care not to contact the body
with the bumper. Tighten bolts using 21mm and a 22mm wrench and socket.
See Photo 13.
15.
Install spare tire guide tube onto bumper with supplied 6mm Allen head bolts, small OD flat washers and lock nuts.
See
Photo 14.
Use a 10mm wrenches to tighten. Make sure inside of tube is even with the hole in bumper.
16.
Install supplied LED license plate marker lights and license plate.
See Photo 15.
These lights will need to be spliced into the
existing license plate wiring in the harness.
17.
Unclip trailer wiring harness from frame. This is done for slack. Install new trailer plug bracket and install plug. Install the
plug bracket using the supplied 6mm x 16mm bolts, nuts and large OD flat washers.
See Photo 16.
Reinstall the trailer con-
nection in the bumper and plug in the harnesses that were unplugged for the trailer connection, license plate harness and
proximity sensors if equipped.
Photo 13
Photo 14
Photo 16
Photo 15
