rough country 82000BAG1, Руководство пользователя

Страница: 2 / 6

1. Locate the (6) skid plate bolts in the skid plate using a 12mm socket. See Photo 1.
2. Remove the front trim panel from the bumper by releasing the 4 clips. . See Photo 2.
3. If equipped remove the tow hooks in the front of the vehicle.
4. Preform the next step one side of the vehicle at a time.
5. Remove the 3 bolts in the front bumper using a 14mm socket (shown on the driver side). See Photo 3.
6. Locate the driver side bracket shown in Photo 4.
7. Install the driver side bracket. Secure the bracket to the vehicle using (3) of the supplied 10mm - 1.25 x 35mm hex
head bolts and (3) 10mm flat washers. Only snug the hardware hand tight using a . See Photo 5.
8. Secure the bottom of the bracket using (1) of the supplied 12mm - 1.25 x 35mm hex head bolt and (1) 12mm Flat
Washer. See Photo 6.
9. Repeat steps 2 - 8 on the opposite side of the vehicle.
Photo 1 Photo 2
Photo 3 Photo 4
Photo 5 Photo 6
Locate the skid plate bolts. Remove the access panel.
Remove the bolts from the bumper. Locate the driver side bracket.
Install the driver side bracket. Install the bolt behind the bumper.
INSTALLATION INSTRUCTONS