The entire cable harness installation should be checked:
– Avoid the cable harness touching any moving parts
– Cable paths must be smooth and free from sharp edges
– Moving parts must not exert any pressure, tension or flex on the cable harness
– The functionality and effectiveness of the drive system and the brakes should be
checked
– The drive system should be set to the German language and metric units. Soft-
ware updates tend to also be security-related. Therefore the software status of
the drive system should be checked and updated if necessary.
Experience shows that unsold bikes tend to be given to consumers
for test rides on the spur of the moment as soon as the bike is
ready to be ridden. Therefore all bikes must be made completely
ready for use immediately after assembly.
It is recommended that the supplied charger and instruction ma-
nual are immediately labelled, for example with the bike's frame
number, in order to avoid confusion.
30
