Page 8
recommended AC/DC adapter. Never exceed the recommended Voltage (13-17 volts
DC). Make sure you use the ‘XTRA Strap’ cable ties to secure the Power connector /
adapter to your light stand, so there is no strain on the 2.1mm DC Socket, otherwise
damage may occur to the socket.
Utility Blocks
Use these to connect the Yoke, or Barn Doors. There are additional mounting holes
on the rear face and either side of the main mounting point, these can be used to fix
the T-Bar connector plates which join the lights together. ANOVA is designed with an
outer ‘Honeycomb’ shape so it can easily be ‘tesselated’ into a panel/wall/ring of lights.
Rotolight Inc at Pinewood Studios, England (+44 1753 422750) are happy to quote on
custom Yokes for larger arrays of ANOVA lights.
The ANOVA Yoke is fitted with a ‘TVMP’ (TeleVision Motion Picture) bracket. This will
fit a standard ‘Junior’ Lighting support stud as used in film and televison studios. The
TVMP Bracket on the ANOVA has two positions for the retaining screw, The higher
position is for a Junior stud, the lower position is so you can mount the Anova on a 3/8
stud on a normal studio lighting stand
(Please check that the stand is designed to take the weight of the Anova, aproximately 2.6
Kg without Barn Doors or 4.1Kg with Yoke and the Barn Doors fitted)
V-Lock Battery Plate
Connect standard (14.4 volt) V-Lock Batteries or Anton Bauer Goldmount Batteries
with a QR-A200 plate adapter. To release the battery, press the button on the bottom
of the plate.
7
8
Содержание Anova
Страница 1: ......
