Keeping the World Flowing
29
Prior to dismounting the actuator, check if any of its parts are
still under pressure.
For Single-Acting Actuator
The spring cartridge module could contain potential
energy due to compressed elastic elements.
After removing the spring cartridge from the centre body,
the spring cartridge must be returned to the manufacturer’s
plant, upon agreement with Rotork Fluid System.
Grease and oil must be disposed of safely in
accordance with the local environmental laws and
regulations.
• Dismount the actuator, separate and divide the various
parts and components per the type of material
• Dispose of the pieces of steel, cast iron and aluminium
alloys as metal scraps
• Dispose of the rubber, PVC, resins etc. separately, in
accordance with the existing national and regional
regulations
• Electric components are to be separately disposed of on
specialized disposal sites
Actuators manufactured after 1993 year do not contain
asbestos or its by-products.
If your Rotork actuator has been correctly installed and
sealed, it will give years of trouble-free service. Should you
require technical assistance or spares, Rotork guarantees
the best service in the world. Contact your local Rotork
representative or the factory direct at the address on the
nameplate, quoting the actuator type and serial number.
Some actuators have a special spare parts list. Refer to the
project specific documentation for further details.
13.0 Dismantling & Disposal
14.0 Rotork Sales and Service
A4
US
US
A4
US
A4
A4
US
