1
Mount Handle Instruction Sheet
DLX T-Handle:
This Mount Handle uses less arm strength and allows for extra tightening power.
Step 1
-
Insert
DLX T-Handle into the
Upright Base then tighten to desired
tension while keeping the indents
on the underside of the Lower
Wing aligned with the Fuel
Pack bumps.
(see
Figures 1
-
3
)
LOX T-Handle:
This Mount Handle enables security by incorporating a locking mechanism into the
handle, preventing anyone from removing your Fuel Pack without having the key.
Step 1
– Insert the
LOX T-Handle into
the Upright Base
then tighten to
desired tension
while keeping the
indents on the underside of the Lower
Wing aligned with the Fuel Pack bumps.
(see
Figures 4
and
5
)
Step 2
- Ensure that the square bottom of the Lower Wing has been snugly inserted into the hole of the
Fuel Pack and that the Lower Wing and the Upper Handle are aligned (see
Figure 6
).
Step 3
- Insert lock into
the hole, far enough
that the top of the
lock is flush with the
top of the handle.
The handle is now
locked.
(see
Figure 7
and
8
)
Step 4
- To remove lock, insert key into lock, twist key and pull out (see
Figure 9
).
Note:
To ensure extended life, lubricate the lock periodically.
(Instructions for the Pack Mount Extension are found on page 2)
