CAUTION: stand clear of bands when cutting as they could be under sufficient
tension to cause them to fly loose. Take care in removing bands and wire, they
often have extremely sharp edges and cut very easy.
3.03 - Cutting Height Adjustment
WARNING: keep hands and feet away from moving blades.
Be sure tractor engine is off, parking brake is locked, and key is removed before
making any adjustments.
Never rely on the tractor lift system. Install blocks or stands under the mower
deck to prevent it from falling.
The cutting height is the distance from the blades to the ground. The cutting height is
adjusted by
moving the spacers on the wheel yokes.
Placing spacers between the
wheel arm and the wheel yoke raises the cutting height by the size of the spacer.
Removing the spacers, lowers it by the same height
(see fig. 5)
.
Be sure all wheel arms are adjusted equally. This is the only way to ensure a
completely uniform cut.
CYCLONE 'C70'
OPERATOR'S MANUAL
OPERATION
13
ROTOMEC
Fig. 4 - 'C70' mower rear mounted.
