SETTING THE TRANSMITTER TO MANUAL FLASH MODE (NOT TTL)
Rotolight is not a TTL Flash, it is a manual flash. The transmitter must be in manual mode to Flash the Rotolight.
Out of the box, transmitters on the latest Elinchrom firmware will startup in TTL mode. You will need to be in
Manual mode to sync your Rotolights.
This setting can be simply changed by pressing the leftmost button.
Your are in the correct mode if you see the word ‘TTL’ rather than ‘Manual’ above the bottom left button - this
indicates that by pressing that button you would enter TTL mode rather than indicating that you are in TTL mode.
TYPE
F1
ALL {2}
S
MOD
PWR
A
NEO2
4300
68%
NEO2
5100
84%
TTL
Select
Power
Setup
B
F1
ALL
EV
MOD
Grp1
Grp2
Grp3
Grp4
Manual
OFF
EV
Setup
TTL
S
+1.3
+1.3
+1.3
+1.3
ON
ON
ON
ON
CORRECT (YOU CAN SEE UNIT NAMES AND THE
WORD TTL BOTTOM RIGHT CORNER)
INCORRECT (YOU CAN’T SEE UNIT NAMES AND SEE
THE WORD MANUAL BOTTOM RIGHT CORNER)
