Roto ZEL STG HS 1 II, Руководство пользователя

Страница: 16 / 44

Explanation of functions
Channel
The channel of a hand-held transmitter can be programmed into one or more
receivers. One receiver is operated through an individual command, several
receivers through a group command.
Programming the remote control
Programming the remote control (variant 1)
This description applies to the following products:
•
Roller shutter ZRO EF
• Awning ZMA EF
• Radio receiver FE 24 V
•
Radio receiver FE 230 V
• Remote-controlled socket FSD
1) Programming the master transmitter
a) Preparing the receiver for programming
Operate the programming button on the transmitter using a
suitable cylindrical tool (e.g. a ballpoint pen).
• Switch off the power supply to the receiver for 5 seconds, then switch it
back on
or
•
Operate the programming button or the radio switch of the receiver.
The receiver is now in programming mode for 3 minutes.
b) Programming the master transmitter
Press the programming button on the master transmitter while in program-
ming mode until the receiver confirms that programming has been successful.
The programming process is now complete.
2) Programming additional transmitters
1. Press the programming button of the master transmitter until the re-
ceiver confirms.
16 - en