Roto Safe Eneo C, CC and CF
1
2
3
4
5
6
Eneo C / CC / CF
GND
K1b
K1a
IN2
+24V
IN1
black
green
pink
pink
pink
bro
wn
bro
wn
brown
brown
brown
bro
wn
gre
y
gre
y
gre
y
green
green
green
green
green
yello
w
yello
w
yello
w
yellow
white
white
white
white
EZ-cable 3m
insertable
cable junction
on the sash
on the frame
Switch
power supply
Eneo
Switch
"Day / Night"
N
IN: 100-240V AC
OUT: 24V DC/ 2,5A
+V -V
+24VGND
L
plug / cable assignment
white: IN1 / Input 1 (open)
brown: +24V
green: GND
yellow: IN2 / Input 2 (day/night)
grey: K1a dry contact
pink: K1b dry contact
INFO
If there is +24 V voltage at terminal 4, the lock is in “day operation mode”. If there is no voltage, the lock
is in “night operation mode”.This can be used as an option.
Terminals 5 and 6 are connected to one another internally via a relay and a 47 ohm resistor. The
maximum load of the contacts is 24 V / 40 mA.
Maximum line lengths
Eneo cable junction, insertable 180°, incl. 4 m cable with
round connector for Eneo Control Unit up to power
supply unit.
From Eneo cable junction connector
Up to 4 m
Up to 10 m
Up to 20 m
Up to 30 m
Up to 50 m
0.34 mm
2
0.75 mm
2
1 mm
2
1.5 mm
2
2.5 mm
2
Eneo cable junction 180° opening, not insertable, with
cable for cable junction 7 x 0.5 mm
2
, 10 m.
From Eneo drive unit
Up to 10 m
Up to 20 m
Up to 30 m
Up to 50 m
0.5 mm
2
1 mm
2
1.5 mm
2
2.5 mm
2
INFO
If a cable junction with built-in power supply
unit is used, it must have three poles and a
cable cross section of 1.5 mm
2
.
Roto Safe Eneo
Subject to change.
Roto Safe Eneo
SUG_11_EN_v0
·
04 / 2019
· 3
