Roto-Mix VXT 325 Скачать руководство пользователя страница 4

Limited Warranty Statement 

ROTO-MIX LLC warrants to the original purchaser all products manufactured by it to be free from defects in material and 
workmanship under normal use and service.  
ROTO-MIX’s obligation under this warranty is limited to repairing or replacing, as the company may elect, free of charge 
and without charge for installation, at the place of business of a dealer or distributor authorized to handle the equipment 
covered by this warranty or at a ROTO-MIX plant, any parts that prove, in the company’s judgment, to be defective in 
material or workmanship within one (1) year after delivery to the original purchaser, and still owned by the original 
purchaser.   This warranty shall in no way make ROTO-MIX liable to anyone for personal injuries or damages, loss of 
time, or expense of any kind either direct or indirect resulting from part failure or defect.  This warranty is subject to acts of 
God, fire and existing conditions of supply and demand, or production, or ability or inability to deliver, or for any other valid 
reason beyond the reasonable control of ROTO-MIX, to obtain materials, manufactured replacement parts, or make 
delivery thereof.  No distributor, dealer, agent, or ROTO-MIX employee (other than the CEO or President in writing) is 
authorized to extend any other or further express or implied warranty or incur any additional obligation on ROTO-MIX’s 
behalf in connection with the sale of this product.  

Customer Responsibility 
Product Registration

 - It is a condition of this warranty that the original purchaser must fill out the warranty card 

furnished by ROTO-MIX and that it be returned to ROTO-MIX and be recorded in ROTO-MIX’s owner file for this warranty 
to be valid. In the event an owner’s card is not on file at the ROTO-MIX office, the warranty period will extend only from 
date equipment was picked up or shipped from the ROTO-MIX plant.     

Maintenance

 - It is the customer’s responsibility to maintain their equipment in accordance with the instructions provided 

in the Operator’s Manual.   ROTO-MIX recommends that you keep records and receipts; you may be asked to prove that 
maintenance instructions have been followed. 

Operation

 – It is the customer’s responsibility to operate the equipment only for the purpose for which it was designed 

and in accordance with all safety and operational recommendations contained in the Operators Manual.  If a defect in 
materials or workmanship occurs, it is the customer’s responsibility to cease operating the equipment until authorized 
repairs are made

.  Damage, which occurs from continued operation, may not be covered by this warranty. 

What this Warranty Covers 

This warranty covers failures caused by defects in materials or workmanship only. 

This Warranty does not cover failures caused by: 

 

Improper operation 

 

Natural calamities 

 

Unauthorized modifications 

 

Unauthorized repairs 

 

Use of Non ROTO-MIX parts 

 

Neglected maintenance 

 

Usage contrary to the 
intended purpose of the 
product 

This Warranty does not cover replacement of Wear or Maintenance Items (unless defective) including, but not limited to. 

 

Lubricants 

 

Filters 

 

Hoses 

 

Tires 

 

Augers 

 

Wipers

 

 

 

Blades 

 

Belts 

 

Chains 

 

Idlers 

This Warranty does not cover: 

Pickup and delivery of the equipment  
Service Calls or Travel Time to and from sites 
Rental of replacement equipment during repair period 
Products that have been declared a total loss and subsequently salvaged 
Overtime labor charges 

 

Right to Make Changes 

ROTO-MIX reserves the right to make any changes to a ROTO-MIX product at any time without incurring any obligation 
with respect to any product previously ordered, sold or shipped, with or without notice. 

 
Parts Warranty

  

ROTO-MIX warranties replacement parts against defects in materials or workmanship for a period of 90 days or the 
remainder of the product warranty, whichever is longer.  Remedy for defective replacement parts for units that are beyond 
the original product  warranty, will be limited to replacement of the failed part. Failures that are due to damage, improper 
installation, lack of maintenance or improper operation will not be covered. 

ROTO-MIX  

2205 East Wyatt Earp Blvd., Dodge City, KS  67801  (620) 225-1142  Fax:  (620) 225-6370 

Содержание VXT 325


































Отзывы: