background image

 

8

 

EQUIPMENT SAFETY GUIDELINES 
 

Safety of the operator is one of the main concerns in designing and developing a 
new piece of equipment.  Designers and manufactures build in as many safety 
features as possible.  However, every year many accidents occur which could have 
been avoided by a few seconds of thought and a more careful approach to handling 
equipment.  You, the operator, can avoid many accidents by observing the following 
precautions in this section.  To avoid personal injury, study the following precautions 
and insist those working with you, or for you, follow them. 
 
In order to provide a better view, certain photographs or illustrations in this manual 
may show an assembly with a safety shield removed.  However, equipment should 
never be operated in this condition.  Keep all shields in place.  If shield removal 
becomes necessary for repairs, replace the shield prior to use. 
 
Replace any CAUTION, WARNING, DANGER or instruction safety decal that is 
not readable or is missing.  Location of such decals are indicated in this manual. 
 
Do not attempt to operate this equipment under the influence of drugs or alcohol. 
 
Review the safety instructions with all users annually. 
 
This equipment is dangerous to children and persons unfamiliar with its operation.  
The operator should be a responsible adult familiar with farm machinery and trained 
in this equipment’s operations.  Do not allow persons to operate or assemble this 
unit until they have read this manual and have developed a thorough understanding 
of the safety precautions and of how it works. 
 
To prevent injury or death, use a tractor equipped with a Roll Over Protective 
System (ROPS).  Do not paint over, remove or deface any safety signs or warning 
decals on your equipment.  Observe all safety signs and practice the instructions on 
them. 
 
Never exceed the limits of a piece of machinery.  in its ability to do a job, or to do so 
safely, is in question - 

DON’T TRY IT. 

 
 
LIGHTING AND MARKING 
 

It is the responsibility of the customer to know the lighting and marking 
requirements of the local highway authorities and to install and maintain the 
equipment to provide compliance with the regulations.  Add extra lights when 
transporting at night or during periods of limited visibility. 

SAFETY

READ BEFORE

YOU FEED

Содержание 274-12






































































Отзывы: