rotigrill XL3 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 13

rotigrill XL3 Скачать руководство пользователя страница 9

© Rotigrill Limited

Your Rotigrill XL3 is fully adjustable so that perfect results are achievable.

To raise and lower the three main skewers, just rotate the turning handle at the opposite end to the
motor. The mechanism will automatically lock when you stop turning.

The kebab gearbox and skewer rest, together with the two mesh grill rests are also adjustable
manually. Just loosen the wing bolts and adjust as necessary. The re-tighten the wing bolts to
secure. If you do this once the coals have been lit,

YOU MUST USE AN OVEN GLOVES

.

The internal fire trays will distort when used. This is deliberate and prevents “popping” where
sparks can fly! They should return to near normal shape when cool.

Care Of Your Rotigrill

Your XL3 comes with a cover, but if possible it is better to store the unit in a shed or garage during
the winter period.

At the end of your BBQ season, lightly spray the entire unit (except motors, skewers, kebabs and
forks) with WD40 (WD = water dispensing). This helps to prevent rust.

If rust occurs on any of the powder coated surfaces, remove it with a wire brush and spray with
silver “Hammerite” (it is a near perfect colour match).

Motors are designed to work in hot conditions.  If you try to use your motor in cold conditions and it
fails to turn, switch it off immediately.  Apply  a small spray of WD40 around the  square drive and
rest the motor on a radiator for a short time.  Your motor should now work perfectly.

Do not leave batteries in motors for extended periods as they can corrode.

For guidance on lighting the charcoal and cooking, please read the rotisserie cooking guide that
follows.

8

Operating Instructions

continued

«
...
7
8
9
10
11
...
»

Содержание XL3














Отзывы:

Нет отзывов