Rothenberger ROPOWER 50 R, Инструкция по эксплуатации, Страница: 8 / 50

31
3 Functions of the thread-tapping machine
3.1 Overview / accessories / description
3.1.1 Overview, thread-tapping machine
Overview, control elements (> see front fold-out page):
1 Pipe cutter 5 Oil drainage screw
2 Thread-tapping jaws 6 Feeder hand wheel
3 Internal deburrer 7 Centring chuck
4 Tool carriage 8 Clamping chuck
3.1.2 Overview, automatic thread-tapping head
Overview, control elements (> see front fold-out page):
10 T-handle 13 Selector block
11 Locking lever 14 Cam plate
12 Selector pin 15 screw
3.1.3 Accessories
Use only suitable accessories recommended by ROTHENBERGER Werkzeuge GmbH!
Pipe stand , Height-adjustable, with ball guide, for pipes up to 6”
NIPPEL MAX Spare cutting wheel
For internally clamping D=41 mm, L=19 mm, DA=9 mm
short pipe sections hardened special steel for
manufacturing für machine type
nipples and double nipples - PANDA 40, PANDA 90
size 1/2“…2“, - PISET 3 SG, No. 6
Recycling pipe waste pieces - SUPERTRONIC 2S, 3S, 4S, 2SE,
saves time and money 3SE, 4SE, ROPOWER 50 R
automatic fast clamping
and centring of the RONOL SYN
pipe pieces for right-hand High-performance thread-tapping fluid
and left-hand thread mineral oil-free, synthetic-based specially
for fast, rational working, developed and approved for drinking
automatic release after water and sanitary installation.
completion of the nipple, 100 % water-soluble, physiologically
hardened, ground harmless.
clamping jaws - in 5-litre plastic canisters
- NIPPEL MAX-Set, complete in sheet RONOL
steel carrying case High-performance thread-tapping fluid
1/2“ • 3/4“ • 1“ • 1 1/4“• 1 1/2“ mineral oil-based, very well suited
for thread-tapping work on all
- Nipple holder materials including stainless steel.
1/2“ • 3/4“ • 1“ • 1 1/4“ • 1 1/2“ • 2“ - in 5-litre plastic canisters
- Sheet steel case
- Plastic inlay