Rothenberger RO AG8000, Инструкция по эксплуатации

Страница: 31 / 232

ENGLISH 27
Rotating battery pack:
The rear section of the machine can be rotated 270° in three
stages, thus allowing the machine's shape to be adapted to the
working conditions. Only operate the machine when it is in an
engaged position.
Removing and inserting the battery pack:
Removal:
Press the battery pack release (8) button and pull the battery pack (9) forwards.
Inserting:
Slide in the battery pack (9) until it engages.
4.3 Attaching the grinding wheel
Before carrying out any modifications: remove the battery pack from the ma-
chine. The machine must be switched off and the spindle at a standstill.
For reasons of safety, attach the parting guard before performing parting work
(see chapter accessories).
Locking the spindle:
Press in the spindle locking button (5) and turn the spindle (4) by hand until you feel the
spindle locking button engage.
Placing the grinding wheel in position:
Fit the support flange (3) on the spindle. The flange
should not turn on the spindle when properly attached.
Place the grinding wheel on the support flange (3). The
grinding wheel must lay flat on the supporting flange. The
metal flange on the parting grinder disc must lay flat on
the support flange
Note: The support flange (3) is secured to prevent it from falling off. To remove: use some force
if necessary.
Securing/releasing the (tool-free) clamping nut:
Only tighten the (tool-free) clamping nut (2) manually!
For the machine to operate, the clip (1) must always lie flat on clamping nut (2).
To secure the (tool-free) clamping nut (2):
Do not use the (tool-free) clamping nut if the accessory has a clamping shank thick-
er than 6 mm!
Lock the spindle.
Flip up the clip (1) on the clamping nut.
Fit the clamping nut (2) on the spindle (4).
Tighten the clamping nut on the clip (1) manually in a clockwise direction.
Flip down the clip (1) again.
To release the (tool-free) clamping nut (2):
Lock the spindle
Flip up the clip (1) on the clamping nut.
Unscrew the clamping nut (2) , turning it anticlockwise
manually
.