Before Use
25
GB
The pointed soldering tip
10
is particularly suitable for spot soldering and
thin cables.
The flat soldering tip
7
is particularly suitable for light electrical soldering
work.
• Remove the existing soldering tip
by turning it counterclockwise out
of the soldering iron
4
.
• Screw the new soldering tip by
hand clockwise as far as it goes
into the soldering iron. Do not over
tighten the thread.
Proceed as follows to change the soldering tip:
• Place the sponge pad
9
in the
space provided for the cleaning
sponge
11
.
• Place the cleaning sponge
8
in the provided space.
• Wet the cleaning sponge.
Connect the soldering station only to a socket that is properly earthed. The
soldering station is designed for use with single phase alternating current
230-240 V AC / 50 Hz.
Placing the cleaning sponge
Connecting the power supply
4
11
8
9
CAUTION!
Always wet the cleaning sponge when using and do not use it
without the sponge pad.
1500003258_Anleitung_DE_GB_FR.indb 25
1500003258_Anleitung_DE_GB_FR.indb 25
29.11.2019 08:31:15
29.11.2019 08:31:15
