Roth Sub Zero II, Инструкция по эксплуатации

Страница: 10 / 16

10 | Roth SUB ZERO II User Manual
Sub Zero II
TV Soundbar with bluetooth APT-X
Controls and Functions
The controls and functions of the Sub Zero ii are explained below.
Front Panel Controls / LED Indicators
1. REmOTE CONTROl Sensor Area
Point your remote control at this area when you use the
remote control.
2. POwER Button
Plug the power cord into the AC outlet. The Sub Zero II goes
to the standby mode. Press this button to turn the Sub Zero
II on; this Power indicator will turn off to indicate the Sub
Zero II is on. This indicator will remain on as long as an input
signal is active. If the input becomes inactive the Sub Zero
II will change to standby mode to conserve power and this
indicator will illuminate.
3. POwER ON indicator
Plug the power cord into the AC outlet. The Sub Zero II goes
to the standby mode. Press this button to turn the Sub Zero
II on; this Power indicator will turn off to indicate the Sub
Zero II is on. This indicator will remain on as long as an input
signal is active. If the input becomes inactive the Sub Zero
II will change to standby mode to conserve power and this
indicator will illuminate.
2
7 8 6 5
4
3
4. mAiN VOlUmE level indicator
The indicator shows the level of the main volume or
Soundbar volume when, you use the or
VOLUME - Button respectively. This indicator will turn
off a few seconds from adjusting the volume.
5. Button
Adjust the main volume up respectively.
6. VOlUmE - Button
Adjust the main volume down respectively.
7. mode Button
Press this button to select DSP mode for Movies or
Music. Choose whichever mode sounds right to you -
people have different tastes so we do not assume that
just because we like to watch movies with the Movie
mode switched-on, you will too.
8. SOURCE Button
Press this button to select INPUT 1, INPUT 2, INPUT 3
or INPUT 4.
iNPUT 1 - RCA
Connection type-RCA. Use this input to connect with
your external device (Blu-ray players, DVD players, CD
players, MP3 players, or Home video Game Systems
iNPUT 2 - 3.5mm liNE iNPUT
Connection type-3.5 mm stereo cable. If your TV has
a headphone output, this is a primary input to use by
using the supplied 3.5 mm mini stereo cable.
iNPUT 3 - OPTiCAl iNPUT
Connection type- Optical Input . If your TV does not
have a headphone output, use the input to connect
with the set-top-box by using the Optical INPUT cable
(not included).
iNPUT 4 / BlUETOOTh APT-X iNPUT
To pair with your Bluetooth device, switch to this input
and there will be an audible tone from the soundbar.
‘Search’ for the ID ‘SUBZERO’ and when found press
‘PAIR’ on your device. There should be a second
audible tone to confirm pairing and away you go!
Roth Sub Zero II Manual UK EM.indd 10 11/10/2013 10:12