User Manual - 7/12
Tue.
06.07.21
09:25
Network name:
RUT950_537A
Signal
Active
1
3
4
6
5
2
III. SCREEN DESCRIPTION
IV. WIFI MODULE FUNCTIONS
1. Day of the week
2. Current date.
3. Current time
4. Network name (SSID)
5. Showing if the module is active (online).
6. Shows the signal strength of the connection between the WiFi Internet module and the locale WIFI router.
1. NETWORK WIFI SELECTION
To enable the Roth WiFi Internet module to connect to the internet, it needs to be registered to the local router.
Registration of WiFi internet module to local router:
Press MENU to enter, select “Network Wi-Fi selection” with MENU. The WiFi Internet module will now search for any possible router connections
in the area, which will be displayed after signal strength. Select the desired router with ▼ or ▲ – confirm with MENU.
Enter the password for the router by using ▼ or ▲ to select characters (holding in ▼ or ▲ will make the characters run fast), to jump to the next
character, press MENU. Finish by pressing MENU when it says “Confirm”.
If the WiFi Internet module is correctly linked to the router, there will be a message on the display with “Connection has been successfully
established”, end by pressing MENU.
Block diagram – main menu
2
Block diagram – main menu
Diagram – Network configuration menu
Diagram – registration menu
Menu
Network
WiFi
selection
Network
configura-
tion
Registra-
tion
Reset
module
password
Time
settings
Screen
settings
Language
version
Service
menu
Factory
settings
Software
version
Menu
Registra-
tion
Do you want to
register the
module?
Yes
No
Menu
Network
configura-
tion
Disconnect
DHCP
IP address
Subnet
Mask
Gateway
address
DNS
address
MAC
address