4
9. Do not soak more than 3 cm from the tip of the sampling stick (comb) into water or other liquid
samples. Water or other liquid samples which wet the shaft of the sampling stick (green) may
affect test results.
10. Ensure that the LuciPac
®
A3 Aqua is not shifted or displaced, discard the item, because
accuracy cannot be guaranteed, swabs are not removable from the Lumitester PD30/Smart,
or the instrument may cause an error (malfunction).
11. If the test reagent is leaking please don't use the swab!
7. Measurement
Complete the procedures listed below within a temperature range of 20 °C to 35 °C (68 °F to
95 °F). Make sure to always run measurement tests at the same temperature to maintain
repeatability for comparison. Remove the LuciPac
®
A3 Aqua from refrigerator and wait until they
have reached room temperature (about 20 min, 20 °C to 35 °C (68 °F to 95 °F)). Use the sampling
devices then as soon as possible.
1. Remove the sampling stick from the main body (casing).
2. Soak sampling stick about 3 cm from the tip of the sampling stick into water or other liquid
samples, and shake gently. Make sure no bubbles remain within sampling stick's comb.
3. Pull out the sampling stick slowly and straight up from the sample.
4. Return the sampling stick to the main body (casing) and push it all the way into the main body.
5. Push firmly onto LuciPac
®
A3 Aqua casing and agitate.
6. Allow the leftover luminescent reagent to thoroughly dissolve.
7. Insert the LuciPac
®
A3 Aqua into the Lumitester to measure the results. Press ENTER.
8.
Remove the LuciPac
®
A3 Aqua case from the measuring chamber.
8. Safety recommendations
Please observe the following items to ensure safe use of this product.
Please note safety recommendations given in the Safety Data Sheet!
Do not attempt to drink the kit reagent or touch it with bare hands or allow it to splash into
eyes. Please make sure to read the precautions and instructions in this Instruction Manual
before attempting to use the kit and exercise extreme caution when using it.
Be careful not to get fingers caught when inserting the sampling stick into the main body
(casing).
Handle with care when storing and disposing of the device and its reagents to ensure that
none of the substances become mixed with food and other products.
Please make sure to store this kit and its parts out of the reach of young children.
Take precaution when disposing of this kit after use to ensure that such substances do not
become mixed with food products at food production centers and similar facilities
9. Short instruction
Prior to use, make sure the LuciPac
®
A3 Aqua sticks have come to room temperature.
But then use immediately.
