ROTH BAR 1
High-power audio for your living room
12 | Roth Bar 1 User Manual
NOTES
You can leave the Subwoofer on – it will go into a low power consumption mode when not in use but will wake up automatically when a signal is present.
Wireless Link
The BAR1 and Subwoofer should automatically link together. However, it is sometimes possible, in conditions of very
high radio interference (such as from microwave ovens or strong wireless network equipment), for the BAR1 and the
Subwoofer to lose their wireless link. In that case the Subwoofer will mute and the audio will sound weak (no bass).
To correct this, press and hold the PAIRING button on the back of the BAR1 at least 3 seconds until the PAIR indicator
on the front panel starts flashing.
Then go to the back of the Subwoofer and press its PAIRING button. The two units should link back up and the PAIR
indicator on the Subwoofer turns on. The PAIR indicator on the BAR1 will turn off, after the link between the BAR1 and
the Subwoofer is established.
PAIRING Button
Back of Subwoofer
Subwoofer Back Panel
PAIR Indicator
PAIRING Button
Roth SoundBar Manual EH.indd 12
7/3/11 11:20:16
