3 Operation
Operation manual
16
RHYH RHYHBH/X08AA
ROTEX HPU hybrid heat pump module
4P353066-1B – 2013.10
Example:
t
Tt
60°C
00:00
07:00
50°C
45°C
15°C
40°C
14:00
21:00
1
2
4
3
Using the DHW tank temperature home page
Typical DHW tank temperature home pages
Depending on the user profile, the user interface gives you either a
basic or a detailed home page. Depending on an installer setting,
either an actual temperature or a number of people is displayed to
indicate the domestic hot water tank temperature. The examples in
the illustrations below are in DHW tank mode = Scheduled.
User profile = Basic
User profile = Detailed
0RQ
7DQN
'HVLUHGWHPSHUDWXUH
r&
0RQ
7DQN
6WRUDJHFRPIRUW
r&
7XH
0RQ
7DQN
'HVLUHGWHPSHUDWXUH
0RQ
7DQN
6WRUDJHFRPIRUW
7XH
To read out and adjust the desired reheat temperature (in
scheduled and reheat mode)
1
Go to [7.4.3.3]:
> User settings > Preset values > Tank
temperature > Reheat.
Result:
You can read out the desired reheat temperature.
2
Press
or
to adjust.
To read out and overrule the active or next scheduled desired
temperature (in scheduled mode or sch reheat mode)
1
Go to the DHW tank temperature home page (Tank).
Result:
r&
or
is displayed.
2
Press
or
to overrule.
Note:
If the desired temperature is
weather dependent, you cannot change it on the home page.
Using the DHW tank booster mode
To activate the DHW tank booster mode (method 1)
1
Go to the DHW tank temperature home page (Tank).
2
Press
for more than 5 seconds.
To activate the DHW tank booster mode (method 2)
Prerequisite:
User profile = Detailed
1
Go to the DHW tank temperature home page (Tank).
2
Press
to select .
3.5
Schedules: Example
INFORMATION
The procedures to program other controls are similar.
In this example:
▪
Room temperature schedule in heating mode
▪
Monday = Tuesday = Wednesday = Thursday = Friday
▪
Saturday = Sunday
To program the schedule
1
Go to [7.3.1.1]:
> User settings > Set schedules > Room
temp. > Set heating schedule.
2
Select Empty and press
.
3
Program the schedule for Monday. See below for more details.
4
Copy from Monday to Tuesday, Wednesday, Thursday and
Friday. See below for more details.
5
Program the schedule for Saturday.
6
Copy from Saturday to Sunday.
7
Save the schedule and give it a name. See below for more
details.
To program the schedule for Monday
1
Use
and
to select Monday.
2
Press
to enter the schedule for Monday.
3
Program the schedule for Monday:
▪
Use
and
to select an entry.
▪
Use
and
to change the value of an entry.
To copy from one day to another
1
Select the day from which you want to copy and press
.
Example:
Monday.
2
Select Copy day and press
.
3
Set the days you want to copy to Yes and press
.
Example:
Tuesday = Yes, Wednesday = Yes, Thursday = Yes and Friday
= Yes.
To save the schedule
1
Press
, select Save schedule and press
.
2
Select User defined 1, User defined 2 or User defined 3 and
press
.
3
Change the name and press
. (Only applicable for room
temperature schedules).
Example:
MyWeekSchedule
To select which schedule you currently want to use
1
Go to [5]:
> Select schedules.
2
Select for which control you want to use a schedule.
Example:
[5.1] Room temperature.
3
Select for which operation mode you want to use a schedule.
Example:
[5.1.1] Heating.
4
Select a predefined or user-defined schedule and press
.
