Rotenso TA35X, Руководство пользователя

Страница: 46 / 52

46
User manual
Room air conditioner - TETA X
EN
PART 5. OPERATING INSTRUCTIONS
1. COOLING MODE
2. HEATING MODE
The cooling function allows the air conditioner to cool the room and reduce Air humidity
at the same time.
To activate the cooling function (COOL), press the
button until the symbol
appears on the display.
With the button or set a temperature lower than that of the room.
The heating function allows the air conditioner to heat the room.
To activate the heating function (HEAT), press the
button until the symbol
appears on the display.
With the button or set a temperature higher than that of the room.
NOTE
In HEATING operation, the appliance can automatically activate a defrost cycle, which
is essential to clean the frost on the condenser so as to recover its heat exchange
function. This procedure usually lasts for 2-10 minutes.
During defrosting, indoor unit fan stop operation. After defrosting, it resumes to
HEATING mode automatically.
4. FAN MODE (not fan button)
Change the operating fan speed.
Press
button to set the running fan speed, it can be set to AUTO/ MUTE/ LOW/ LOW-
MID / MID/ MID-HIGH/ HIGH/ TURBO speed circularly.
5. FAN SPEED function (FAN button)
Fan mode, air ventilation only.
To set the FAN mode, press the
button until appears on the display.
3. DRY MODE
This function reduces the humidity of the air to make the room more comfortable.
To set the DRY mode, press the
button until appears in the display. An automatic
function of pre-setting is activated.