20
User manual
Split wall air conditioner - IMOTO W
8. UP butto (
)
Pressing the button increases the indoor temperature setting by 1°C, increases to 30°C.
DOWN butto (
)
Pressing the button reduces the indoor temperature setting by 1°C, decreases to 17°C.
9. SILENCE/FP
• urn the SILENCE function ON/OFF. Pressing the button for more than 2 seconds will turn on the FP
function, holding it again for more than 2 seconds will turn it off.
• If the SILENCE function is on, the compressor will operate at a low frequency and the indoor unit will
provide a light breeze which will keep the sound level to the lowest and create a quiet and pleasant
room. Due to the low operating frequency of the compressor, the cooling and heating capacity may be
insufficient.
• The FP function can be used during HEAT operation (Heating only). The unit will work at the set
temperature of 8 ° C. The indoor unit display will show FP. Pressing the ON/OFF, SLEEP, FP, MODE, FAN
SPEED, UP, DOWN buttons during operation will disable the FP function.
10. TIMER ON
Pressing this button will set the automatic start time. Each press will increase the automatic start time by
30 minutes. While the time settings display 10H, each press will increase the automatic start time by 60
minutes. To cancel the auto-start program, set the auto-start time to 0.0H.
11. TIMER OFF
Pressing this button will set the automatic shutdown time. Each press will increase the automatic turn off
time by 30 minutes. While the time settings display 10H, each press will increase the auto-off time by 60
minutes. To cancel the auto-start program, set the auto-off time to 0.0H.
12. SWING button ( )
The button responsible for stopping or immobilizing the movement of vertical blinds and airflow settings in
the left/right direction. The blinds change the angle by 6 degrees with each press of the button. The indoor
unit temperature display field will display „ „For one second. Pressing the button for more than 2 seconds will
activate the automatic movement of the blind and the display field of the indoor unit will display four times
„ „And then the temperature will be displayed again. If the automatic louver operation is stopped, the
message „LC” will be displayed for 3 seconds.
SWING button ( )
The button responsible for stopping or immobilizing the movement of the horizontal louvers and setting
the air flow in the given up/down direction. The blinds change the angle by 6 degrees with each press
of the button. Pressing the button for more than 2 seconds will activate the automatic movement of the
blind.
13. FOLLOW ME
Press this button to start the FOLLOW ME function, the wireless remote will display the temperature in
his position. The wireless remote will send a signal to the air conditioner every 3 minutes until the button
is pressed again. The air conditioner will turn off the function automatically if it does not receive a signal
within 7 minutes.
14. LED
ON/OFF the display of the indoor unit. When the button is pressed, the indoor unit display will turn off,
pressing again will turn on the display.
PART 5. REMOTE CONTROL OPERATION
