GIRU W - Portable air conditioner
18
User manual
PART 4. OPERATIONS AND FUNCTIONS
4. AUTO operation
• When you set the air conditioner in AUTO mode, it will automatically select cooling, or fan only operation
depending on what temperature you have selected and the room temperature.
• The air conditioner will control room temperature automatically round the temperature point set by you.
• Under AUTO mode, you can not select the fan speed.
NOTE
: Under AUTO mode, both the AUTO mode and the actual operation mode indicator lights illuminate for
some models.
5. FAN operation
• Press the MODE button until the FAN indicator light comes on.
• Press the FAN SPEED"button to choose the fan speed. The temperature can not be adjusted.
• Do not put the duct to window.
6. TIMER operation
• When the unit is on, press the Timer button will initiate the Auto-off stop program, the TIMER OFF indicator
light illuminates. Press the UP or down button to select the desired time. Press the TIMER button again within
5 seconds, the Auto-on start program is initiated. And the TIMER ON indicator light illuminates. Press the up or
down button to select the desired Auto-on start time.
• When the unit is off, press the Timer button to initiate the Auto-on start program, press it again within five
seconds will initiate the Auto-off stop program.
• Press or hold the UP or DOWN button to change the Auto time by 0.5 hour increments, up to 10 hours, then at 1
hour increments up to 24 hours. The control will count down the time remaining until start.
• The system will automatically revert back to display the previous temperature setting if there is no operation in
a 5 seconds period.
• Turning the unit ON or OFF at any time or adjusting the timer setting to 0.0 will cancel the Auto Start/Stop timer
program.
• When the malfunctionoccurs, the Auto Start/Stop timed program will also be cancelled.
7. SLEEP/ECO operation
Press this button, the selected temperature will increase (cooling) or decrease(heating) by 1°C/2°F(or 1°F) 30
minutes. The temperature will then increase (cooling) or decrease (heating) by another 1°C/2°F(or 1°F) after an
additional 30 minutes. This new temperature will be maintained for 7 hours before it returns to the originally selected
temperature. This ends the SLEEP/ECO mode and the unit will continue to operate as originally programmed.
NOTE: This feature is unavailabe under FAN or DRY mode.
3. OTHER FEATURES
1. FOLLOW ME/TEMP SENSING feature(optional)
NOTE
: This feature can be activated from the remote control ONLY. The remote control serves as a remote thermostat
allowing for the precise temperature control at its location. To activate the FOLLOW ME/TEMP SENSING feature,
point the remote control towards the unit and press the FOLLOW ME/TEMP SENSING button. The remote control
will send this signal to the air conditioner until press the FOLLOW ME/TEMP SENSING button again. If the unit does
not receive the FOLLOW ME/TEMP SENSING signal during any 7 minutes interval, the unit will exit the FOLLOW
ME/TEMP SENSING mode.
NOTE
: This feature is unavailabe under FAN or DRY mode
