9
User manual
DAGA wireless controller
PART 2. FUNCTION DESCRIPTION
2. COOLING MODE
The cooling function allows the air conditioner to cool the
room and at the same time reduces Air humidity.
To activate the cooling function (COOL), press the MODE
button until the symbol COOL appears on the display.
The cooling function is activated by setting the button or
at a temperature lower than that of the room.
To optimize the function of the Air conditioner, adjust the
temperature (1), the speed (2) and the direction of the air
flow (3), by pressing the button indicated.
3. HEATING MODE
The heating function allows the air conditioner to heat the
room.
To activate the cooling function (HEAT), press the MODE
button until the symbol HEAT appears on the display.
With the button or set a temperature higher than that of
the room.
To optimize the function of the Air conditioner adjust the
temperature (1), the speed (2) and the direction of the air
flow (3), by pressing the button indicated.
NOTE
In HEATING operation, the appliance can automatically activate a defrost cycle, which is essential to clean the
frost on the condenser so as to recover its heat exchange function. This procedure usually lasts for 2-10 minutes
during defrosting indoor unit fan stop operation After defrosting it resumes to HEATING mode automatically.
Fig. 15
3
1
2
Fig. 16
3
1
2
4. FAN MODE (NOT FAN BUTTON)
The air conditioner works in only ventilation.
To set the FAN mod, Press MODE until FAN appears on the
display.
To optimize the function of the air conditioner, adjust the
speed (2) and the direction of the air flow (3) by pressing the
buttons indicated (Fig.20).
Fig. 17
3
1
2
